Fast, Reliable Gate Installation Across Lomita
Gate installation in Lomita, CA typically runs $2,800–$7,500 depending on gate type, materials, and whether new footings are needed for older homes. Most Lomita installations are completed in one to two days, with free estimates available by calling (833) 805-4890. We’re familiar with the narrow side yards and aging concrete throughout Lomita’s 90717 neighborhoods, from the post-war bungalows near Narbonne Avenue to the hillside homes off Palos Verdes Drive North.
David and his team at Ironwood Gate Repair have been installing and replacing gates across Lomita for 14 years. We know the local conditions that ruin gates here: the salt-laden marine layer rolling in from the Port of Los Angeles, the original concrete aprons from the 1950s and 1960s that heave and tilt posts, and the obsolete hardware on side-yard gates that no big-box store carries anymore. When you need a gate that actually functions in Lomita’s specific environment, you need someone who has worked on hundreds of local properties — not a general handyman guessing at the problem.
Why Ironwood Gate Repair Los Angeles Is Lomita’s Preferred Gate Installation Company
Our 233 verified customer reviews averaging 4.7 stars include repeat calls from Lomita homeowners who initially hired us for a repair and came back for full installation once they saw how we diagnose problems. David Kaplan serves as both owner and Field Supervisor, so the person with final accountability arrives on your property — not a rotating crew you’ve never met.
We respond to Lomita calls within the same day in most cases, and we stock parts for nine major automation brands including Linear, Viking, and DoorKing. That means when we quote your installation, we’re not ordering components from a warehouse three counties away and hoping they fit. Our in-house welding capability lets us fabricate custom hardware on the spot for the odd dimensions common in Lomita’s older housing stock.
We’ve replaced gates on Lomita’s small lots where a standard 16-foot driveway gate won’t clear the sidewalk, and we’ve solved the post-tilt problem that plagues so many 1960s installations. That local knowledge saves you from the cycle of partial fixes that fail within a year.
Our Gate Installation Services in Lomita
Swing Gate Installation
Swing gates remain the most common replacement we install in Lomita, especially on the single-family homes built between 1950 and 1970. These properties typically have 12- to 14-foot driveway openings with limited side clearance, so a properly hung swing gate with correct post placement matters enormously. We regularly remove original chain-link or wrought iron swing gates where the posts have tilted due to slab heaving — a problem we solve with independent concrete footings set below the driveway apron. For automation, we recommend operators with sealed motors that resist the salt air blowing in from San Pedro Bay.
Double Gate Installation
Double gates — two swing panels meeting in the center — work well on Lomita’s wider driveways, particularly on corner lots near Lomita Boulevard or properties with alley access off Eshelman Avenue. The key challenge here is synchronization: both leaves must meet flush and latch cleanly even as the ground shifts over decades. We install adjustable center stops and heavy-duty drop bolts that compensate for minor settling, and we always pour independent footings rather than anchoring to existing concrete. A double gate installation in Lomita typically runs $3,800–$6,200 depending on material and automation.
Security Gate Installation
Lomita’s proximity to major thoroughfares like Pacific Coast Highway and the 110 freeway makes driveway security gates a practical investment for many homeowners. We install steel and aluminum security gates with integrated access control — keypad, remote, or smartphone-enabled — and we program them on-site so you’re not waiting for a third-party technician. Given the salt-air corrosion problem, we specify powder-coated aluminum frames with stainless steel hardware for security gates in Lomita, or hot-dip galvanized steel with proper drainage at the base. Security gate installations with full access control typically range from $4,500–$7,500.
Sliding Gate Installation
Sliding gates make sense on Lomita properties where a swing gate would block the sidewalk or where the driveway slopes steeply upward from the street. We’ve installed sliding gates on hillside homes near the Palos Verdes border where a swing gate would scrape the pavement. The track system must be perfectly level and anchored to a dedicated concrete pad separate from the driveway slab — critical in Lomita, where older concrete is often compromised. A sliding gate installation runs $3,200–$5,800 depending on length and motor specification.
Pedestrian Gate Installation
The narrow side-yard passages common in Lomita’s post-war housing stock — sometimes just 36 inches wide — demand carefully measured pedestrian gates. We frequently replace rusted original side-yard gates where the hinge pins have seized solid or the frame has rotted through at the weld. Our in-house welding lets us fabricate custom widths that stock gates won’t accommodate, and we always set independent posts with proper drainage to prevent the repeat failures we’ve seen on so many Lomita properties.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lomita
We work on your brand — and we stock parts for it. Our team is factory-trained or field-proven on nine major automation brands including Linear, Viking, Ghost Controls, and DoorKing. For Lomita customers, this means when we install a new automated gate, we’re not guessing at compatibility or ordering parts that take two weeks to arrive. We carry common operator models, replacement circuit boards, and safety sensors in our service vehicles. If your existing system uses a brand we support, we can often integrate new gate hardware with your current opener rather than forcing a full replacement. That saves money and reduces downtime.
Common Gate Installation Problems We See in Lomita Homes
- Posts tilted by heaving concrete aprons. In a 1950s bungalow on Narbonne Avenue, we found the driveway gate’s post had tilted 3 inches because the original concrete apron heaved. The chain-link gate’s bottom rail had rusted through at the weld near the hinge. We replaced both posts with independent footings and installed a new swing gate from Elite, ensuring proper clearance for the narrow side yard.
- Salt-air corrosion at welds and hinge pins. The prevailing southwest marine breeze from the Port of Los Angeles deposits salt on every exposed ferrous surface. We regularly find hinge pins frozen solid with rust and weld joints cracked through oxidation — failures that look like simple wear but are actually environmental damage.
- Obsolete hardware on 1960s and 1970s gates. Many Lomita side-yard gates use hinge styles, latch mechanisms, or frame dimensions that haven’t been manufactured in decades. Big-box stores don’t stock them, and general contractors typically don’t know where to source equivalents. Our in-house fabrication solves this.
- Surface rust masking structural failure. Homeowners often see rust and assume a hinge swap will restore function. In Lomita, that rust frequently hides the real problem: a post tilted by slab movement, a frame twisted by years of binding, or a bottom rail rotted through at the concrete contact point.
Pricing for Gate Installation in Lomita, CA
| Gate Type | Typical Range in Lomita | Notes |
|---|---|---|
| Pedestrian / side-yard gate | $2,800–$4,200 | Custom fabrication common for narrow passages |
| Single swing driveway gate | $3,200–$5,500 | Includes independent footing if needed |
| Double swing driveway gate | $3,800–$6,200 | Center stop and synchronization hardware included |
| Sliding driveway gate | $3,200–$5,800 | Separate track pad required |
| Security gate with access control | $4,500–$7,500 | Keypad, remote, or smartphone entry |
| Post replacement with independent footing | $800–$1,400 per post | Common add-on for 1960s installations |
What drives cost up or down? Material choice matters: aluminum with powder coat costs more upfront than standard steel but lasts longer in Lomita’s salt air. Footing condition matters more — if we need to break out old concrete and pour independent footings, that adds labor and material but prevents the tilt-and-bind failure that ruins most Lomita gates. Access control complexity, gate width, and whether we’re integrating with an existing automation system all affect the final number. We provide upfront pricing after a free on-site evaluation — call (833) 805-4890 to schedule.
We Also Serve Cities Near Lomita
Our Gate Installation team works throughout the South Bay, including Torrance to the north, Rolling Hills Estates to the west, San Pedro to the south, and West Carson to the east. The same salt-air conditions, aging post-war housing stock, and port-proximity corrosion patterns apply across this corridor, and we bring the same diagnostic rigor to every property.
Serving Lomita, CA — Our Local Coverage Area
We’re based in the Lomita area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Installation in Lomita
Many Lomita homes built in the 1950s through 1970s have gate posts set directly into the driveway apron concrete rather than independent footings. As that original concrete heaves from moisture cycles and tree-root pressure, the post tilts with it. The fix is breaking out the old concrete, pouring a dedicated footing below slab level, and resetting the post plumb. Call (833) 805-4890 for a free evaluation of your post condition.
Sometimes, but rarely on older Lomita properties. The rust you see usually indicates deeper problems: the hinge pin has seized into a corroded barrel, the weld attaching the hinge to the gate frame has cracked, or the post itself has tilted and is binding the gate. We inspect the full assembly before quoting — a hinge swap on a tilted post wastes your money. Estimates are free; call (833) 805-4890.
Powder-coated aluminum with stainless steel hardware outperforms standard steel in Lomita’s harbor-proximity environment. Hot-dip galvanized steel is a cost-effective alternative if the coating remains intact, but any scratch or weld point becomes a corrosion entry. We avoid bare mild steel entirely for Lomita installations — the salt air destroys it within five to seven years regardless of paint quality.
We fabricate replacement hardware in our shop. Hinge styles, latch mechanisms, and frame dimensions from the 1960s are obsolete, but our welding equipment lets us build exact equivalents that fit your existing opening and post spacing. This is faster and more precise than trying to adapt modern stock hardware to old dimensions. Bring a photo or call (833) 805-4890 — we can usually assess feasibility from a few clear images.
Yes: specify sealed, corrosion-resistant automation components, and plan for access control that works reliably in marine humidity. We recommend operators with sealed gearboxes and circuit boards conformal-coated against moisture. For the gate itself, aluminum construction with stainless steel fasteners prevents the rust-driven failures we see constantly on Lomita’s older steel installations. Security gate installations with full access control typically start around $4,500. Call (833) 805-4890 to discuss your specific driveway layout and security priorities.
Written by David Kaplan, Owner and Field Supervisor at Ironwood Gate Repair, serving Lomita and the greater Los Angeles area since 2010.