Fast, Reliable Gate Repair Across Pomona
Gate repair in Pomona typically runs $180–$650 depending on whether you’re dealing with hinge wear, post corrosion, or a full realignment, and our Gate Repair team usually completes same-day fixes for standard hinge and roller issues. We carry parts for nine major automation brands and handle structural welding in-house, so most Pomona calls don’t require a second trip.
We’ve been driving out to Pomona from our Los Angeles base for fourteen years, and David Kaplan still runs jobs personally as Field Supervisor. Whether you’re off Holt Avenue near the 10, up in the northside 91767 ZIP, or running a warehouse gate along Mission Boulevard by the 60, we know the route and we know what fails on Pomona gates. Call (833) 805-4890 for a free estimate.
Why Ironwood Gate Repair Los Angeles Is Pomona’s Preferred Gate Repair Company
Our 233 verified reviews averaging 4.7 stars include plenty from Pomona homeowners who found us after a generalist couldn’t finish the job. David and his team are gate-only specialists. That focus matters in a city where so many gates are complex, aging systems rather than straightforward modern installs.
Response time to Pomona averages 45–90 minutes during business hours, and we stock parts for Linear, Viking, Ghost Controls, and DoorKing systems locally. When your gate is stuck open after hours, that’s the difference between a same-day fix and a three-day wait for ordered parts.
What separates us in Pomona specifically is our fluency with legacy wrought iron. Most gate companies in the region focus on new aluminum or steel installations. We’re the ones who know how to diagnose whether your 1987 ornamental iron gate needs hinge pinning, post re-welding, or if the retrofit opener is finally cooked after decades of mismatched load cycling.
Our Gate Repair Services in Pomona
Hinge Repair
Pomona’s 1980s and 1990s ornamental iron security gates carry original hinges that have seen thirty to forty years of Santa Ana wind stress and thermal cycling. We see the same failure pattern across ZIP codes 91766 and 91767: bottom pins seized in their barrels, elongated pivot holes, and gates that sag until the latch no longer meets the strike. A typical hinge repair or replacement in Pomona runs $180–$320. We can often re-pin and bush existing wrought iron hinges rather than replacing the whole assembly, which preserves the original gate character and saves you money.
Post Repair
Ground-contact posts on older Pomona iron gates corrode from the base up, especially where sprinkler runoff pools against the concrete footing. We’ve replaced posts on homes near Garey Avenue and fixed leaning gate columns off Foothill Boulevard where the original shallow slab foundation let the post drift with the driveway. Post repair or replacement in Pomona typically costs $280–$550 depending on whether we can sister the existing post or need to excavate and pour new concrete. Our in-house welding means we fabricate custom post caps and flanges on-site rather than waiting for a metal shop.
Weld Repair
The severe thermal cycling in Pomona’s inland valley, where summer highs exceed 105°F, warps metal gate frames and opens stress cracks at weld joints. Last spring we took a call in the 91766 ZIP off Mission Boulevard: a 35-year-old wrought iron slide gate with a mismatched retrofit LiftMaster opener had racked off its track because both bottom rollers were seized from rust. We replaced the rollers with oversize FAAC units, reinforced the strike post, and aligned the gate, saving the owner $1,200 versus a full replacement. Weld repair in Pomona runs $150–$400 for crack repair and reinforcement, with full frame section replacement at the higher end if corrosion has compromised structural integrity.
Gate Realignment
Cracked and heaved concrete driveways are standard on Pomona’s 1940s–1970s postwar lots, and they wreck gate alignment. Slide gates rack off their tracks. Swing gates bind at the latch because the post has shifted half an inch. We realign gates to the actual ground plane, not some theoretical level, and we adjust or relocate strike posts to match. Gate realignment in Pomona typically costs $200–$380. If your driveway slab has lifted significantly, we’ll tell you honestly whether concrete grinding or mudjacking needs to happen first, or whether we can compensate with adjustable hardware.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pomona
We work on your brand. Our trucks stock parts and programming tools for Linear, Viking, Ghost Controls, and DoorKing systems, plus five additional major automation brands. Pomona customers with retrofitted openers often discover their original installer is long gone and their brand “isn’t supported” by the next company they call. That’s not our approach. David and his team have fourteen years of field experience with each of these nine brands, and our in-house parts capability means we’re not waiting on a distributor for a limit switch or control board. Most Pomona automation repairs finish same-day.
Common Gate Repair Problems We See in Pomona Homes
- Sagging wrought iron gates with original 1980s–1990s hinges. The ornamental iron security gate wave that swept Pomona during those decades left a legacy of beautiful but fatigued hardware. Hinge barrels wear oval, gates drop, and latches miss by inches. We fix this weekly in the 91766 and 91767 ZIPs.
- Racked slide gates from shifted concrete driveways. Pomona’s older postwar slabs heave and crack with thermal expansion and tree root intrusion. A slide gate that ran fine in 2010 now binds at the center because the track has developed a belly. We realign, adjust rollers, or relocate track supports.
- Weld joint failures from extreme thermal cycling and wind loading. Santa Ana gusts through the Pomona Pass corridor impose lateral shock on gate frames, and the daily 40°F+ temperature swing fatigues welds that were never designed for it. We grind, prep, and re-weld with proper penetration.
- Mismatched retrofit openers straining beyond capacity. A residential-grade opener retrofitted to a heavy wrought iron gate in 1995 will eventually burn out its motor or strip its nylon gears. We diagnose whether the opener can be salvaged with proper limit settings or if it’s time for a correctly spec’d replacement.
Pricing for Gate Repair in Pomona, CA
| Service | Typical Range in Pomona |
|---|---|
| Hinge repair / re-pinning | $180 – $320 |
| Post repair / reinforcement | $280 – $550 |
| Weld repair (cracks, reinforcement) | $150 – $400 |
| Gate realignment | $200 – $380 |
| Lock / latch repair | $120 – $250 |
| Rust treatment and coating | $180 – $350 |
| Emergency / after-hours call | $250 – $450 |
What moves you within these ranges? Gate material and weight, accessibility of the failed component, whether we can repair or must replace, and whether the failure is isolated or symptomatic of broader misalignment. A hinge job on a light aluminum gate in good condition sits at the low end. A corroded post requiring excavation and custom welding on a heavy wrought iron assembly runs higher. We diagnose before we quote, and estimates are always free. Call (833) 805-4890.
We Also Serve Cities Near Pomona
Our service radius covers San Dimas to the east, La Verne and Charter Oak in the foothills, and Diamond Bar to the south. Each city has its own gate character, Diamond Bar’s newer tract homes presenting different challenges than Pomona’s legacy iron stock. Wherever you are in the Pomona Valley, David and his team bring the same gate-only focus and same-day parts capability.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Repair in Pomona
We can almost always repair the hinges. Original wrought iron hinges on Pomona’s 1980s–1990s security gates are heavy-duty castings that outlast the pins and bushings inside them. We re-pin, re-bush, or weld in new pivot barrels for $180–$320, versus $2,500–$4,500 for a comparable new ornamental iron gate. Full replacement only makes sense when the gate frame itself is structurally compromised by widespread corrosion. Call (833) 805-4890 and we’ll assess it in person, estimates are free.
Santa Ana wind gusts through the Pomona Pass impose sudden lateral loads that a marginally aligned gate can’t absorb. If your bottom rollers were already worn or your track had shifted with your heaved driveway, the wind finishes the job. We see this most on older slide gates in the 91766 and 91767 ZIPs. The fix is realignment, possible roller upsizing, and track reinforcement, not just shoving the gate back on. Call (833) 805-4890 for a same-day assessment.
Yes, and we account for it. Pomona’s 1940s–1970s concrete slabs are notorious for heaving, and a gate aligned to level hardware will bind within months. We measure your actual driveway plane and set posts, track, and adjustable hardware to match. Sometimes that means relocating a strike post or using oversize adjustable hinges. We tell you upfront if concrete work beyond our scope needs to happen first. Call (833) 805-4890 for a free evaluation.
Yes. Pomona properties with 1980s-era security upgrades often have matching driveway and pedestrian iron assemblies, and we regularly repair both in a single call. The same hinge wear, post corrosion, and lock failure patterns apply. One visit saves you a second trip charge and lets us assess whether both gates share a common foundation or alignment issue. Call (833) 805-4890 to schedule.
Yes. Along Mission Boulevard and White Avenue, we service industrial chain-link slide gates that take constant abuse from delivery trucks and forklifts. These almost always need oversize bottom rollers and reinforced strike posts that standard residential suppliers don’t stock locally. We carry them. Commercial gate repair in this corridor runs $350–$800 depending on roller size and structural reinforcement needed. Call (833) 805-4890 for an exact quote, estimates are free.
Written by David Kaplan, Owner and Field Supervisor at Ironwood Gate Repair Los Angeles, serving Pomona and the greater Los Angeles area since 2010.