Ghost Controls Gate Repair in Shadow Hills, CA | Ironwood Gate Repair Los Angeles
Ghost Controls gate repair in Shadow Hills typically runs $180–$420 depending on whether you’re looking at a motor rebuild, limit switch recalibration, or hinge and post welding after livestock contact. We’re an independent service shop, not a Ghost Controls dealer, and we’ve completed over 300 Ghost Controls calls in this neighborhood alone. Call (833) 805-4890 for a free estimate, usually same-day in the 91040 area.
Why Shadow Hills Residents Choose Us for Ghost Controls Service
We’ve been working on Ghost Controls operators in Shadow Hills for 14 years. David Kaplan, our owner and field supervisor, grew up in Palms and learned his electrical fundamentals at LA Trade-Tech downtown before spending years diagnosing swing and slide operators across Los Angeles County. He still shows up on jobs himself. That matters here because Shadow Hills gates fail in ways that require someone who can read both a low-voltage control board and a bent hinge post.
Our shop stocks genuine Ghost Controls modules and OEM motors for the TSS, SW, and ACX series. We also carry certified aftermarket hinges and photo-eye sensors when they match or exceed factory spec. We’re not authorized by Ghost Controls, and we don’t pretend to be. What we are is fluent in their product line from field repetition, with in-house welding capability so we don’t subcontract the hard parts.
233 verified reviews at 4.7 stars. Nine automation brands including Ghost Controls, LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule. When another company tells you your system “isn’t supported,” call us.
Common Ghost Controls Gate Repair Problems We Solve in Shadow Hills
- Worm gear burnout on SW slide operators. Santa Ana winds funneled through the Verdugo Hills foothill corridor blast fine grit into SW slide gearboxes. We’ve replaced more of these in Shadow Hills than in flat Valley neighborhoods like North Hollywood because the airborne debris accelerates wear by roughly double. The motor labors, overheats, and eventually strips the bronze worm gear.
- Limit switch calibration drift on TSS openers. West-facing metal gate boxes on 1950s ranch driveways hit 100°F+ interior temperatures by mid-afternoon. The TSS1 and TSS2 limit switches drift out of calibration after sustained heat cycling, causing the gate to stop short or over-travel into the stop plate.
- Hinge pin fatigue on oversized swing gates. Shadow Hills properties often run 16-foot or wider single swing gates at long driveway entrances. The Ghost Controls DSS-1 dual-swing kit is sometimes pushed beyond recommended gate weight, and daily livestock bumping at the back corral transfers stress forward. We diagnose whether it’s the operator arm, the hinge, or the post footing.
- Corrosion at low-voltage wire splices. Ghost Controls cable run through unsealed conduit under original concrete driveways from the 1960s and 70s wicks groundwater. The splice points green out and drop signal intermittently. We trace the fault, pull new cable where needed, and seal the run properly.
- ACX track system misalignment after wind events. The foothill wind corridor that defines Shadow Hills knocks ACX track systems out of parallel. The gate binds, the motor amps spike, and the overload trips. We realign the track, reset the motor limits, and check the foundation posts for footing shift.
Ghost Controls Service in Shadow Hills: What Local Conditions Mean for Your Equipment
Shadow Hills is one of the last legally recognized equestrian communities inside the City of Los Angeles, with lots specifically zoned for horse-keeping. This creates a repair environment that doesn’t exist in neighboring Sunland Ghost Controls service areas or Sun Valley. Your front driveway likely runs an automated Ghost Controls TSS2 or SW operator on a 200-foot approach off La Tuna Canyon Road or a similar long rural driveway. Your back pasture has pipe corral gates that take daily horse contact. Both fail, and both need fixing, but almost no technician carries the combined skill set.
We’ve done exactly this combination. Last month we replaced a burnt-out Ghost Controls TSS2 motor at a 5-acre property on La Tuna Canyon Road after Santa Ana winds stripped the limit switch alignment, then drove 200 yards to the back corral to re-weld a hinge post that a horse had knocked off its footing. Both repairs, same day, one work order. That’s the Shadow Hills difference. Your Ghost Controls sales & service needs here aren’t generic automation work. They require someone who can handle the low-voltage electronics and the structural fabrication without calling in a second contractor.
Ghost Controls Models & Products We Service in Shadow Hills
We work on the full Ghost Controls residential and light-commercial line:
- TSS1 / TSS2: Single and dual swing operators for driveway gates up to 20 feet. We stock OEM arm assemblies and control boards for same-day repair.
- SW Slide Operator: Chain-driven slide system for properties with limited swing clearance. Common on long Shadow Hills driveways where the gate runs parallel to a fence line.
- ACX Track System: Wheeled track operator for heavier swing gates. We carry replacement track segments and alignment hardware.
- DSS-1 Dual-Swing: Synchronized pair for wide ranch entrances. We recalibrate the master/slave communication and replace individual arms without swapping the full set.
Our parts stance is straightforward: genuine Ghost Controls modules and motors when available, certified aftermarket where equivalent or superior. We repair rather than replace if the motor and gearbox are sound. No upsell.
Ghost Controls Service Pricing in Shadow Hills
Most Ghost Controls repairs in Shadow Hills fall between these ranges:
- Diagnostic and limit switch recalibration: $180–$240
- TSS1/TSS2 arm or control board replacement: $280–$380
- SW slide operator worm gear or motor rebuild: $320–$420
- ACX track realignment and hardware: $220–$340
- Corral gate hinge welding and post reset: $180–$300
- Low-voltage cable fault trace and repair: $160–$260
Driveway length, gate weight, and whether we’re also handling back-property livestock gates affect the final quote. Estimates are free. We don’t charge to show up and tell you what’s actually wrong. Call (833) 805-4890 for an exact figure on your specific setup.
Serving Shadow Hills, CA — Our Local Coverage Area
We’re based in the Shadow Hills area and know this community well, with Burbank Ghost Controls service also in our coverage zone. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Ghost Controls Gate Repair in Shadow Hills
Usually it’s not sensitivity; it’s physical flex. Santa Ana winds hitting a large swing gate on a long Shadow Hills driveway cause the leaf to bow or the post to twist slightly. The Ghost Controls photo-eye or edge sensor detects an interruption and reverses. We check whether the gate structure is stiff enough for your wind exposure, realign the sensors, and sometimes recommend a wind brace. Call (833) 805-4890 and we’ll sort out whether it’s the electronics or the frame.
Yes. We carry portable welding equipment and stock common hinge sizes for equestrian gates. The combination of front automation repair and back-property structural welding is standard for us in Shadow Hills. One trip, one invoice. Call (833) 805-4890 to schedule both.
Motor replacement on an existing gate frame typically does not trigger a new permit in Los Angeles if you’re not altering the gate size, location, or structural supports. If your installation predates current codes and we discover non-compliant wiring or footing, we’ll flag it before starting work. We’re not permit expediters, but we’ll tell you honestly what the city will want to see.
Could be either, or both. We check the operator arm bushings for wear, the mounting bracket bolts for loosening from vibration, and the gate post for footing settlement or hinge elongation. On Shadow Hills ranch properties with heavy gates and livestock pressure at the back of the property, the front post sometimes shifts incrementally over years, a pattern we also see on Ghost Controls repair in La Crescenta-Montrose calls. We diagnose on-site rather than guessing. Call (833) 805-4890 for a free look.
Often yes, if the gate weight and swing geometry are within TSS2 spec. The TSS2 has more torque and better limit switch hardware, which helps with the heat and wind exposure common in Shadow Hills. We verify your gate dimensions, weight, and post condition before recommending the swap. If your gate is already at capacity, we’ll say so. Call (833) 805-4890 for an assessment.
Service Areas Near Shadow Hills
We run Gate Access Control in Shadow Hills as our base coverage zone, with regular routes extending to Sunland, Sun Valley, Tujunga, and La Crescenta. For Ghost Controls service specifically, we also handle Ghost Controls service in San Leandro and Ghost Controls service in Orangevale through our broader California network. In the Los Angeles area, David and his team cover the full foothill corridor from Burbank to Sylmar.
Book Your Ghost Controls Service in Shadow Hills Today
Same-day availability most weekdays for Shadow Hills calls. David Kaplan handles field supervision personally, so the person with final accountability is the one who shows up. Tell me what it’s doing — or not doing — and we’ll figure it out from there. Call (833) 805-4890 for a free estimate.
Written by David Kaplan, Owner and Field Supervisor at Ironwood Gate Repair Los Angeles, serving Shadow Hills and Los Angeles County since 2010.