Trusted Gate Installation for Los Angeles Homeowners
A new gate installation in Los Angeles typically costs $2,800–$8,500 depending on size, material, and automation, with most residential driveway gates completed in 1–3 days. Ironwood Gate Repair Los Angeles has installed gates across the city for 14 years, from hillside homes in Silver Lake to commercial properties in Boyle Heights, with owner David Kaplan supervising every project personally. Call (833) 805-4890 for a free estimate, often scheduled same-day.
We’ve seen what happens when a gate isn’t built for Los Angeles conditions. The marine layer in Echo Park corrodes cheap hardware. The clay-heavy soil in Fruitridge Pocket shifts posts after the first rainy season. A general handyman might miss these things. David and his team don’t, because gates are all we do. Our 233 verified reviews at 4.7 stars come from homeowners, landlords, and property managers who needed a gate that actually worked, day after day, and got one.
What Our Gate Installation Service Includes
Driveway Gate Installation
A driveway gate is the main access point for vehicles, and in Los Angeles it needs to handle daily use, occasional bumper contact, and the city’s permit requirements for automated systems over 10 feet wide. We install single and double driveway gates in steel, aluminum, and wrought iron, with posts set 36 inches deep in concrete to withstand the soil movement common in hillside neighborhoods like Silver Lake and Echo Park. David Kaplan measures the slope, checks the approach angle, and selects the right operator, whether that’s a Viking heavy-duty unit for a steep grade or a Ghost Controls system for a lighter residential application.
Pedestrian Gate Installation
Pedestrian gates see more cycles per day than driveway gates, and in dense neighborhoods like Koreatown and Boyle Heights they often serve as the primary entry point for tenants, delivery drivers, and service workers. We install walk-through gates with self-closing hinges, keypad or card reader prep, and frames rigid enough that the latch still lines up after years of use. Our in-house welding means if your opening isn’t perfectly square, we fabricate custom jamb hardware on-site rather than ordering parts and waiting two weeks.
Sliding Gate Installation
Sliding gates work where a swing gate would block the sidewalk or where the driveway slopes up toward the house, a common scenario in the hills above Los Feliz and Atwater Village. We install V-track and cantilever systems, with the track either embedded in concrete or surface-mounted depending on your substrate and drainage. The motor selection matters here: a DoorKing 9100 series for a light residential gate, a FAAC 844 for a commercial application with hundreds of daily cycles. David tests the rollback distance and setback personally before final welding.
Swing Gate Installation
Swing gates are the classic Los Angeles choice, but they require precise post placement and the right operator geometry to avoid binding or premature arm failure. We install single-swing gates up to 16 feet and double-swing systems up to 32 feet, with underground operators (Elite CSW series) where the clean look matters, or articulated arms (LiftMaster LA500) where post depth is limited by rock or utilities. Every swing gate we install in Los Angeles gets a manual release demonstration; you need to know how to open it during a power outage, especially in fire-prone areas where evacuation access is non-negotiable.
Double Gate Installation
Double gates, or bi-parting systems, split the opening between two panels that meet in the center, reducing the swing arc on each side and working well for wide entrances in West Adams or Hancock Park. The challenge is synchronization: both leaves must start, travel, and stop together, or the center gap will drift and the lock won’t engage. We install master/slave operator configurations with electronic synchronization, and we always include a center stop and drop pin for security when the gate is closed. Our field-tested setups use Viking or DoorKing dual-gate controllers with adjustable soft-start and soft-stop to reduce stress on the hinges and posts.
Security Gate Installation
Security gates in Los Angeles need to do more than look imposing; they need to integrate with access control, camera systems, and sometimes vehicle detection loops for commercial or multi-family properties. We install security gates with anti-climb features, reinforced strike plates, and pre-wired conduit for future card reader or intercom upgrades. In areas like Downtown LA and the industrial corridors near Vernon, we’ve installed gates with loop detectors, telephone entry systems, and timed auto-close functions that property managers can adjust remotely. The welding is structural, not cosmetic: 1/4-inch plate at stress points, gusseted corners, and continuous welds on hidden seams.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We’ve installed and serviced hundreds of Viking operators across Los Angeles, from the CSW200 for residential swing gates to the G-5 industrial slide gate operator used at commercial complexes in Vista. Viking’s Made-in-USA build quality holds up well in coastal air, and we stock their control boards, limit switches, and gear assemblies for same-day repairs when an existing unit needs integration with a new gate.
Ghost Controls systems are our go-to for lighter residential swing gates in neighborhoods like Echo Park and Silver Lake, where homeowners want quiet operation and solar compatibility. We’ve installed their TSS1XP heavy-duty single operators on gates up to 900 pounds, and we appreciate the straightforward limit adjustment that doesn’t require a laptop or proprietary cable. DoorKing remains the standard for multi-tenant and commercial installations; their 1833 telephone entry systems and 9100 slide gate operators are what we specify for apartment buildings in Koreatown and Boyle Heights. Whether you have Elite, Ghost Controls, DoorKing, or any other make, we can help.
Signs You Need Gate Installation Right Now
- Your current gate sags or drags. A gate that scrapes the driveway or catches at the latch isn’t just annoying; it’s stressing the operator, the hinges, and the posts. In Los Angeles, where we install gates on everything from flat lots in West Adams to steep grades in the Hollywood Hills, a sagging gate usually means the original installation didn’t account for soil load or the gate was never properly balanced.
- The frame is rusted through or cracked at welds. Surface rust is cosmetic. A rusted-through tube or cracked weld is structural failure, and in a city with seismic requirements, that’s a liability. We’ve replaced gates in Fruitridge Pocket and Big Bear City where the original installer used thin-wall tubing or skipped internal gusseting entirely.
- You’re manually operating a gate that used to be automatic. If the operator failed and a previous company couldn’t source parts, that’s a sign the original installation wasn’t spec’d for long-term serviceability. We install gates with standard, non-proprietary hardware so any qualified technician can maintain them later.
- Security needs have changed. Maybe you added an ADU and need separate tenant access, or your property in Silver Lake now has regular Airbnb turnover and you need keypad logging. A new installation lets us pre-wire for access control and choose a gate design that accommodates future upgrades without starting over.
- The gate was damaged and insurance is involved. We’ve worked with Los Angeles homeowners on insurance claims after vehicle impacts, fallen trees, and vandalism. A proper installation estimate from a gate-only specialist carries more weight with adjusters than a handyman quote, and we document everything with photos and line-item specifications.
Our Gate Installation Process — Step by Step
- 1
Site survey and measurement. David Kaplan visits your property with a laser measure, grade finder, and soil probe. We check the slope, locate utilities, identify the nearest power source, and photograph the approach from both sides. In Los Angeles, we also verify setback requirements and any HOA design guidelines that affect material or height choices.
- 2
Design and material selection. Based on the survey, we recommend gate style, material (steel, aluminum, or wrought iron), operator type, and access control options. You’ll see a scaled drawing and a fixed-price quote with no hidden excavation or permit fees. We handle Los Angeles Department of Building and Safety permits for automated gates over 10 feet or any installation with electrical work.
- 3
Fabrication and welding. Our in-house welding capability means custom scrollwork, custom jamb widths, or reinforced strike plates are fabricated in our shop, not outsourced. For standard designs, we use pre-engineered frames with continuous MIG welds and galvanized or powder-coated finishes rated for marine exposure.
- 4
Installation and operator mounting. Posts are set in concrete with a minimum 36-inch depth in Los Angeles soil conditions, deeper in hillside areas with expansion potential. We mount the operator, set limit switches with a digital multimeter for precise stop points, and program initial remote or keypad codes. Every weld is inspected, and every bolt is torqued to manufacturer spec.
- 5
Testing and owner training. We cycle the gate 50 times under load, test the safety entrapment sensors, and demonstrate manual release, keypad programming, and any app-based controls. You get a written maintenance schedule, warranty documentation, and David’s direct number if anything doesn’t feel right in the first 30 days.
How Much Does Gate Installation Cost in Los Angeles?
A typical manual pedestrian gate in Los Angeles runs $2,800–$4,200 including steel frame, hardware, and installation. A basic automated driveway swing gate with a standard operator starts around $4,500–$6,800. Heavy-duty sliding gates for commercial or wide residential openings, with operators like the Viking G-5 or DoorKing 9150, range from $6,500–$8,500 depending on width and access control integration. These are installed prices with permits, concrete work, and operator programming included.
Several factors move the price within these ranges. Material thickness matters: 14-gauge steel costs less than 11-gauge but won’t survive a bumper hit or climbing attempt. Operator selection matters: a basic chain-drive unit for occasional residential use is half the price of a continuous-duty commercial operator with battery backup. Site conditions matter most of all. Rock excavation, utility relocation, long trench runs for power, or hillside post bracing all add labor and materials. We’ve seen $800 gates become $3,200 jobs because the previous installer didn’t price the electrical properly.
To avoid overpaying, get a quote that specifies gate dimensions, material gauge, operator model number, and electrical scope. Vague quotes with phrases like “complete system” often hide surprises. Our estimates are free, itemized, and fixed-price. Call (833) 805-4890 for an exact quote on your specific Los Angeles property.
Gate Installation Near Los Angeles — Our Service Area
We install gates throughout Los Angeles proper and surrounding communities, with typical response times of same-day to 48 hours depending on project complexity. Our active service area includes Koreatown, Echo Park, Silver Lake, Boyle Heights, and West Adams within the city, plus outlying areas like Vista to the south and Big Bear City in the mountains for larger commercial projects. We’ve also completed installations in Sacramento and Pleasanton for clients with multiple properties. If you’re unsure whether we cover your location, call (833) 805-4890 and we’ll confirm. For projects outside our standard radius, we coordinate scheduling around existing work to minimize travel costs.
Related: Gate Installation in Sacramento | Gate Installation in Pleasanton
Serving Los Angeles, CA — Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions — Gate Installation in Los Angeles
Gate installation is the complete replacement or new construction of a gate system including posts, frame, hardware, and operator. You need installation rather than repair when the frame is structurally compromised, the posts are failing, or the gate design no longer meets your security or access needs. We’ve had Los Angeles clients spend $1,200 on repeated repairs to a $2,800 gate that needed replacement; David Kaplan will tell you honestly if repair is throwing good money after bad.
Most residential gate installations in Los Angeles take 1–3 days from start to finish, with permitting adding 5–10 business days for automated systems. Complex commercial installations with access control integration may take a week. We schedule fabrication in parallel with permit approval so we’re ready to install the day permits clear. Call (833) 805-4890 to check current lead times.
Gate installation in Los Angeles typically ranges from $2,800 for a manual pedestrian gate to $8,500 for a heavy-duty automated sliding system, with most residential driveway gates falling between $4,500 and $6,800. The final price depends on gate size, material gauge, operator brand and duty rating, site conditions, and whether electrical trenching is required. Our estimates are free and itemized; call (833) 805-4890 for an exact quote on your property.
Yes, we install DoorKing operators, telephone entry systems, and access control components throughout Los Angeles. We’ve specified their 9100 series slide gate operators and 1833 entry systems for multi-tenant properties in Koreatown and commercial complexes near Downtown. We stock common DoorKing parts and can service what we install for the long term. Call (833) 805-4890 to discuss DoorKing options for your project.
Same-day installation is possible for pre-fabricated manual gates in standard sizes if we have inventory and your posts are already set. For custom or automated gates, we typically schedule within 1–2 weeks after the site survey and permit approval. Emergency security situations, like a gate damaged by vehicle impact, get priority scheduling. Call (833) 805-4890 and we’ll tell you honestly what’s possible for your timeline.
We warranty our gate installation workmanship for one year, with manufacturer warranties on operators ranging from 3–7 years depending on brand and model. Viking and DoorKing commercial operators carry longer warranties than entry-level residential units. The warranty covers defects in materials and installation; it does not cover damage from vehicle impact, vandalism, or lack of maintenance. We’ll explain exactly what’s covered before you sign, not after.
Clear the installation area of vehicles, storage, and landscaping that obstructs access to the gate line, and mark any private utilities or irrigation lines you know about. We handle permits, utility locates for public lines, and coordination with HOAs. If electrical service needs to be extended to the gate location, we’ll specify that in the estimate and can coordinate with a licensed electrician or handle it in-house depending on scope. For the fastest start, have your property survey or plot plan available and know your HOA’s design guidelines if applicable.
Schedule Your Gate Installation Service in Los Angeles Today
Call Ironwood Gate Repair Los Angeles at (833) 805-4890 for a free, no-obligation estimate. David Kaplan or a member of his team will visit your property, measure your opening, and give you a fixed-price quote with no hidden fees. We’ve installed gates across Los Angeles for 14 years, and we’re ready to build one that lasts.
Written by David Kaplan, Owner and Field Supervisor at Ironwood Gate Repair, serving Los Angeles since 2011.