Fast, Reliable Gate Installation Across Hollywood
Gate installation in Hollywood typically runs $2,800–$8,500 depending on gate type, material, and automation, with most residential driveway projects completed in 1–3 days. We’re David Kaplan and the team at Ironwood Gate Repair Los Angeles, and we’ve spent 14 years installing gates across Hollywood’s unique terrain, from the flatland corridors near Hollywood Boulevard to the steep canyon roads above Beachwood Drive. If you’re in the 90028 zip or anywhere in Hollywood proper, we can usually be on-site for a free estimate same-day or next-day. Call (833) 805-4890.
Why Ironwood Gate Repair Los Angeles Is Hollywood’s Preferred Gate Installation Company
We’ve earned 233 verified reviews at a 4.7-star rating across Los Angeles, and a significant share of those come from Hollywood homeowners and property managers who’ve learned the hard way that gate installation here isn’t generic work. David Kaplan serves as both owner and Field Supervisor, which means the person with final accountability shows up on your job, not a rotating crew you’ve never met.
Our response time to Hollywood is typically same-day for estimates and within 24–48 hours for installation starts. We know the difference between a flatland install on a 1920s Spanish Colonial bungalow near Franklin Avenue and a hillside project off Laurel Canyon where the driveway grade alone changes every specification. That local knowledge prevents the callbacks and premature failures we’ve seen too many times.
Our Gate Installation Services in Hollywood
Sliding Gate Installation
Sliding gates are the correct solution for most Hollywood Hills properties with driveways exceeding a 10–12% grade. On a steep driveway off Beachwood Drive, we replaced a burned-out standard swing operator on a custom wrought iron gate with a FAAC hydraulic underground operator, solving the binding issue that caused three prior callbacks. For hillside homes above Cahuenga Pass or in the canyons off Mulholland, we spec rack-and-pinion slide systems or hydraulic underground operators that handle the lateral load without fighting gravity. A typical sliding gate installation in Hollywood runs $4,500–$8,500 including automation.
Swing Gate Installation
Swing gates work beautifully on Hollywood’s flatter streets, particularly for the Spanish Colonial Revival and Mediterranean bungalows built between the 1920s and 1940s. These homes often have existing masonry pillars and curved driveways that suit a well-balanced dual-arm swing system. We install swing gates with Linear or Viking operators on flat grades, but we’ll tell you directly if your hillside driveway makes this a poor long-term choice. Standard swing gate installation in Hollywood’s flatland neighborhoods typically costs $3,200–$6,000.
Security Gate Installation
Hollywood’s concentration of entertainment industry professionals and high-profile residents drives demand for privacy-focused security gates that block line-of-sight from the street. Near Hollywood Boulevard and in the Hills, we regularly install custom wrought iron security gates with integrated access control, intercoms, and smart-home connectivity. These aren’t off-the-shelf products. The entertainment industry concentration throughout Hollywood means a disproportionate share of gates are high-end custom wrought iron privacy installations designed to block line-of-sight from the street, a spec demand that simply doesn’t exist at the same volume in neighboring Burbank or Silver Lake. Security gate installations with full automation and access control in Hollywood typically range $5,500–$12,000.
Pedestrian Gate Installation
Pedestrian gates in Hollywood often match existing driveway gates on historic properties, requiring custom fabrication to replicate 1920s ironwork patterns that no manufacturer produces anymore. Our in-house welding capability means we fabricate hardware on-site rather than outsourcing or telling you something “isn’t available.” A standalone pedestrian gate installation in Hollywood runs $1,800–$3,500.
Double Gate Installation
Double gates suit wider Hollywood driveways and commercial properties near the Walk of Fame corridor where high-cycle use demands robust hardware. We spec heavy-duty operators and reinforced hinge systems for these applications. Typical cost: $4,000–$7,500.
Driveway Gate Installation
Driveway gates are our core installation work across Hollywood, from standard aluminum designs to full custom wrought iron with automation. Every driveway gate project starts with grade measurement, soil assessment, and a clear conversation about whether your specific Hollywood location calls for swing, slide, or bi-folding operation.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hollywood
We work on your brand, not just the ones we prefer. Our team is factory-trained or field-proven on nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Hollywood customers, this means we stock local parts for Linear and Viking systems commonly found in flatland installations, and we source FAAC and DoorKing components for the hydraulic and high-security systems more common in the Hills. No one gets told their system “isn’t supported.” Our in-house parts inventory keeps most Hollywood installations moving without the delays of special-order shipping.
Common Gate Installation Problems We See in Hollywood Homes
- Standard dual-arm swing operators fail within a year on hillside driveways exceeding 10–12% grade due to binding and motor burnout. The operator fights gravity every cycle, overheats, and eventually seizes. We see this repeatedly on callbacks to homes above Beachwood Drive where the original installer didn’t account for grade.
- Original 1920s iron gates in Spanish Colonial bungalows lack manufacturer support and require custom fabrication for hardware replacement. These gates often have hand-forged hinges, latches, and scrollwork that no modern catalog matches. Our welding team fabricates replacements rather than forcing incompatible modern parts.
- Santa Ana wind events stress weld joints and bend hinge pins on hillside gates, causing misalignment and needing emergency repairs. The mountain gaps above Hollywood funnel these winds with added force each fall. We design installations with heavier gauge steel and reinforced hinge systems in wind-exposed locations.
- The persistent marine layer in Hollywood’s flatlands accelerates rust on older wrought iron gates that owners rarely treat. Despite the dry reputation, morning fog deposits moisture that corrodes untreated iron over years. We specify galvanizing or powder coating for new installations and can treat existing gates during service calls.
Pricing for Gate Installation in Hollywood, CA
Here’s what gate installation costs in Hollywood’s current market:
| Gate Type | Typical Range in Hollywood |
|---|---|
| Pedestrian gate (manual) | $1,800 – $3,500 |
| Pedestrian gate (automated) | $3,000 – $5,500 |
| Single swing driveway gate | $3,200 – $6,000 |
| Double swing driveway gate | $4,000 – $7,500 |
| Sliding driveway gate | $4,500 – $8,500 |
| Security gate with access control | $5,500 – $12,000 |
What moves you within these ranges: material choice (aluminum vs. steel vs. wrought iron), automation brand and features, access control integration, custom fabrication needs, and site conditions like grade or existing pillar condition. Hillside installations in Hollywood Hills typically run 15–25% higher due to specialized operators and structural reinforcement. We provide free, written estimates with line-item breakdowns. Call (833) 805-4890 to schedule yours.
We Also Serve Cities Near Hollywood
Our Gate Installation team works throughout the Hollywood-adjacent area, including Universal City, West Hollywood, Koreatown, and Echo Park. The same grade-aware expertise, same in-house fabrication capability, same David Kaplan oversight on every job.
Serving Hollywood, CA — Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Installation in Hollywood
They bind against gravity on grades steeper than 10–12%, causing motors to overheat and burn out within months. The correct spec for these Hollywood Hills driveways is always a slide gate with rack-and-pinion drive or a hydraulic underground operator. We’ve replaced dozens of failed swing operators in the canyons above Beachwood and Laurel Canyon with systems that handle the grade properly. Call (833) 805-4890 and we’ll measure your driveway slope during the free estimate.
Yes, we regularly automate historic wrought iron gates in Hollywood’s 1920s–1940s housing stock. The challenge is usually custom fabricating mounting brackets and hinge hardware, since original manufacturer parts no longer exist. Our in-house welding team builds what we need on-site rather than forcing incompatible modern components. We’ve automated original gates from Los Feliz to Hancock Park without compromising their historic character. Call (833) 805-4890 to discuss your specific gate.
Many Hollywood residents, particularly in the entertainment industry, do choose custom wrought iron privacy gates with solid infill panels or strategic screening that blocks line-of-sight while maintaining airflow and code compliance. These aren’t standard catalog items. We design and fabricate privacy-focused security gates specifically for Hollywood’s unique demand, with integrated access control and smart-home connectivity. Call (833) 805-4890 for a design consultation.
Santa Ana winds funnel through mountain gaps above Hollywood each fall, subjecting hillside gates to sudden lateral loads that stress welds, bend hinge pins, and knock operators out of alignment. We design installations in wind-exposed locations with heavier gauge steel, reinforced hinge systems, and wind-resistant operator mounting. If your Hollywood Hills gate has suffered seasonal damage, we can assess whether the original installation was spec’d correctly for the location. Call (833) 805-4890.
High-cycle commercial security gates near Hollywood Boulevard need heavy-duty operators rated for frequent daily use, typically from Viking, DoorKing, or FAAC depending on gate type and cycle count. The transient foot traffic in this corridor means gates cycle far more than residential systems, so underspec’ing the operator leads to premature failure. We calculate actual cycle demand and spec accordingly, with local parts availability for fast future service. Call (833) 805-4890 for a commercial assessment.
Ready to get started? David Kaplan and our team at Ironwood Gate Repair Los Angeles are available for free estimates across Hollywood, from the flatlands to the Hills. We’ll measure your grade, assess your existing conditions, and spec a gate system that actually lasts in Hollywood’s unique environment. No generic recommendations. No outsourcing the hard parts. Call (833) 805-4890 today.
Written by David Kaplan, Owner and Field Supervisor at Ironwood Gate Repair Los Angeles, serving Hollywood and Los Angeles since 2010.