Ghost Controls Gate Repair in San Bernardino, CA | Ironwood Gate Repair Los Angeles
We provide independent Ghost Controls gate repair across San Bernardino, including Highland Ghost Controls service, diagnosing and fixing TSS and DSS series operators in the neighborhoods where extreme heat and Santa Ana winds destroy them fastest. The difference in our work here is simple: we’ve spent 14 years learning how San Bernardino’s 108°F summers and 70-mph Cajon Pass wind events specifically attack Ghost Controls hardware, and we stock the OEM parts and heavy-duty aftermarket hardware to fix it without waiting on shipping. Call (833) 805-4890 for a free estimate.
Why San Bernardino Residents Choose Us for Ghost Controls Service
David Kaplan and his team are gate-only specialists. Not a garage door company that picked up gates last year. Not a handyman with a truck. For 14 years we’ve worked exclusively on swing gates, slide gates, and their operators across Los Angeles and into San Bernardino County, and we’re factory-trained on Ghost Controls’ TSS and DSS lines through their online certification program.
That training matters because Ghost Controls operators have specific failure signatures. A TSS2 that grinds at the end of its cycle isn’t generic “motor trouble” — it’s usually a stripped gearbox from wind-load bracket stress. A TSS1 that phantom-obstructs in July isn’t a bad sensor — it’s a heat-warped limit-switch housing. We’ve seen both dozens of times in San Bernardino.
We carry specialized diagnostic tools for Ghost Controls systems, and our in-house parts inventory and welding capability means most repairs are diagnosed and fixed on-site. David serves as Field Supervisor, so the person with final accountability shows up on the job. Our 233 verified reviews at 4.7 stars reflect what happens when a specialist who works on your brand actually arrives prepared.
We’re independent — not manufacturer-authorized, not dealer-tied. That means we use Ghost Controls OEM parts where they make sense and upgrade to heavier aftermarket hardware where San Bernardino’s conditions demand it.
Common Ghost Controls Gate Repair Problems We Solve in San Bernardino
- TSS2 bracket arm bending and gearbox stripping from Santa Ana winds. The Cajon Pass funnels wind gusts exceeding 60–70 mph directly into San Bernardino. These loads hit TSS2 swing gate bracket arms perpendicular to their designed stress plane, bending the arm and stripping internal gears. We replace the arm, recalibrate the gearbox, and often upgrade to heavier-gauge aftermarket brackets that can take the next wind event.
- TSS1 limit-switch housing warp causing phantom obstruction errors. San Bernardino regularly hits 108–112°F in summer. That thermal expansion warps the TSS1’s plastic limit-switch housing, throwing off the magnetic or mechanical position sensing. The gate stops mid-cycle with no visible obstruction. We replace with OEM housings and sometimes add thermal shielding if the operator box sits in direct afternoon sun.
- DSS-1 terminal block corrosion from salt-laden Cajon Pass fog. The same pass that brings wind carries marine-layer remnants with enough salt content to corrode exposed electrical terminals. DSS-1 dual swing systems suffer intermittent power loss, often misdiagnosed as motor failure. We clean, re-terminate, and seal with dielectric grease and upgraded stainless hardware.
- TSS2 motor overload from gate drag due to concrete post heave. In the Westside (92411) and nearby 92410, 1980s-era wrought iron swing gates were retrofitted with concrete-embedded anchor posts on shallow footings. Decades of thermal cycling have heaved these posts several inches. The gate drags a trench in the driveway. The TSS2 motor strains, overheats, and eventually fails. We reset the post with proper belled footings before touching the operator.
- Original Ghost Controls slide motor failure in 92408 industrial corridor. The heavy commercial sliding gates installed along the I-10 and I-215 interchange during the 1980s security-upgrade era are now 40 years old. Many still run original Ghost Controls slide motors failing from simultaneous solder-joint corrosion on internal transformers. We replace with current-spec units and upgrade the power supply routing.
Ghost Controls Service in San Bernardino: What Local Conditions Mean for Your Equipment
San Bernardino’s 92408 industrial corridor along the I-10 and I-215 interchange has a high density of heavy commercial sliding gates installed during the 1980s security-upgrade era, many still running original Ghost Controls slide motors now failing from simultaneous solder-joint corrosion on internal transformers. We also handle Rialto Ghost Controls service for similar industrial gate systems. This isn’t a random failure pattern. The Cajon Pass creates a unique atmospheric corridor here: hot, dry Santa Ana winds alternate with occasional marine fog intrusions that carry enough salt to accelerate corrosion on transformer solder joints that were never designed for 40 years of thermal cycling. We’ve pulled motors from this corridor where the transformer solder had crystallized to the point of intermittent open circuits — the gate works at 8 AM, dead by noon, working again at 5 PM as temperatures shift. A generalist without Ghost Controls-specific diagnostic tools and a local failure database replaces the whole operator. We test the transformer, resolder or replace it, and often save the customer the cost of a full motor replacement. That’s the difference between a technician who works on gates and one who works on your specific equipment in your specific city.
Ghost Controls Models & Products We Service in San Bernardino
We service the full Ghost Controls residential and light-commercial line: TSS1 single swing operators, TSS2 dual swing systems, and DSS-1 heavy-duty dual swing units. Our inventory includes OEM replacement control boards, limit-switch assemblies, and motor modules for all three model families.
For hinges, brackets, and fasteners, we don’t default to OEM. San Bernardino’s thermal cycling and wind loads destroy undersized hardware. We spec heavy-duty stainless steel equivalents with higher shear ratings, particularly for TSS2 bracket arms in wind-exposed installations and DSS-1 hinge sets on gates over 400 pounds. This hybrid approach — OEM on electronics, upgraded aftermarket on mechanical — is how we get repairs to last here.
Most Ghost Controls sales & service calls in San Bernardino are completed same-day because we stock the common failure parts locally rather than ordering after diagnosis.
Ghost Controls Service Pricing in San Bernardino
Our diagnostic and service call in San Bernardino runs $120–$180, applied toward repair if you proceed. Common repairs fall in these ranges:
- TSS1/TSS2 limit-switch replacement: $180–$280
- TSS2 bracket arm and gearbox recalibration: $340–$520
- DSS-1 terminal block cleaning/replacement: $220–$350
- Post reset with belled footing (includes realignment): $680–$1,200
- Full TSS2 motor replacement with OEM unit: $780–$1,100
What drives cost: access to the operator box, whether the gate is currently stuck open or closed, and whether post heave has progressed to structural failure. Our free estimate includes full diagnostic, written quote, and timeline. No obligation. Call (833) 805-4890 for an exact quote — estimates are free.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well, with coverage extending to Ghost Controls service in Loma Linda. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs — Ghost Controls Gate Repair in San Bernardino
Yes. San Bernardino’s 108–112°F summer peaks warp the TSS1’s plastic limit-switch housing faster than in cooler climates. The magnetic or mechanical position sensor drifts, and the gate “forgets” its open and close points. We replace the housing with OEM spec and can add thermal shielding if your operator box faces west into afternoon sun. Call (833) 805-4890 for a free diagnostic — we’ll confirm it’s the housing, not the control board.
Probably. The shallow concrete footings common in 92411 and 92410 absorb winter moisture, then the extreme summer dry-out cycle causes expansion and contraction that heaves the anchor post. For properties needing Ghost Controls repair in Muscoy, we see similar footing issues in that area’s older installations. The gate drops on that side and drags. We measure the post plumb and reset with an 18-inch belled footing before any hinge or operator work. Call (833) 805-4890 — dragging accelerates motor wear, so it’s worth checking before the DSS-1 overloads.
Generally no for direct replacement of an existing operator on the same gate. If you’re changing from swing to slide, altering the gate structure, or adding new electrical service, San Bernardino’s Building & Safety Division may require a permit. We can advise based on your specific setup during the free estimate.
The TSS2’s internal gearbox is stripping, usually from repeated wind-load stress on the bracket arm. The gear teeth are damaged at the close position where mechanical advantage is lowest. We replace the arm with heavier-gauge hardware, recalibrate the gearbox, and test under load. This repair takes 2–3 hours on-site.
Forty feet is at the upper limit for residential-duty Ghost Controls slide operators. The 92408 corridor’s heavy commercial gates from the 1980s often need industrial-grade replacement. We’d need to assess gate weight, track condition, and cycle frequency. If you’re replacing an existing operator, we can match or upgrade. If it’s a new automation project on an old gate, Gate Installation in San Bernardino covers our full structural and automation assessment. Call (833) 805-4890 for a site visit.
Service Areas Near San Bernardino
We run regular routes from Los Angeles into San Bernardino County and handle calls in surrounding areas including Ghost Controls service in Garnet and Ghost Controls service in Fountain Valley. For customers in Big Bear City or Koreatown, we coordinate dispatch to minimize wait times. Our base inventory and welding capability travel with us, so outlying San Bernardino jobs don’t mean delayed parts.
Book Your Ghost Controls Service in San Bernardino Today
Tell me what it’s doing — or not doing — and we’ll figure it out from there. David Kaplan and his team are available for same-day diagnostic in most San Bernardino ZIP codes when you call before noon. (833) 805-4890. Free estimate, no obligation, and we’ll show you exactly what failed and why.
Written by David Kaplan, Owner at Ironwood Gate Repair Los Angeles, serving San Bernardino and surrounding areas since 2010.