Fast, Reliable Gate Installation Across Mission District
Gate installation in Mission District typically runs $1,800–$4,500 for pedestrian and small courtyard gates, with most projects completed in 2–3 days once permits clear. We’re familiar with the narrow 25-foot lots, century-old ironwork, and DBI requirements that define this neighborhood.
We’ve worked throughout 94110 for 14 years, from the Victorian flats lining Valencia to the Edwardian rowhouses off Mission Street. David and his team understand that a gate in the Mission isn’t just hardware — it’s security on a street where foot traffic never stops, and it’s preservation of ironwork that’s lasted since before the 1906 quake. Call us at (833) 805-4890 for a free estimate. Same-day site visits are usually available.
Why Ironwood Gate Repair Los Angeles Is Mission District’s Preferred Gate Installation Company
Our reputation here was built gate by gate. 233 verified reviews at 4.7 stars reflect jobs we’ve actually finished — not promises. Mission District customers mention our crew by name in reviews because David Kaplan shows up as Field Supervisor. The person with final accountability is the same person measuring your opening and checking hinge alignment.
Response time to Mission District averages same-day or next-morning. We’re not crossing from the East Bay or down from Marin. We know which blocks have parking restrictions, where the sidewalks pitch steeply toward the street, and which properties share party walls that affect gate post placement.
Local knowledge matters when your 1910 iron gate needs welding repair on a stucco pilaster that’s also structural. We handle that in-house. No subcontractor. No two-week wait for a fabricator who doesn’t understand San Francisco’s DBI process.
Our Gate Installation Services in Mission District
Pedestrian Gate Installation
Pedestrian gates dominate our Mission District work. The neighborhood’s built-out 25-foot lots simply don’t have driveway frontage — the entry is a 3-foot iron gate set between stucco pilasters, often original to the 1890–1915 construction. We replaced a pair of century-old pedestrian swing gates on 22nd Street near Valencia. The original hinge pins were completely seized from marine-air corrosion, so we retrofitted heavy-duty stainless steel hinges and welded a reinforcing plate onto the stucco pilaster to handle the gate’s weight. New pedestrian gate installation in Mission District runs $1,800–$3,200, including hardware rated for the marine environment.
Swing Gate Installation
Swing gates remain the default for Mission streetfronts, but the geometry is unforgiving. Uneven sidewalks, century-old pilasters that aren’t plumb, and swing arcs that conflict with pedestrian right-of-way all require field adjustment. We measure slope, check pilaster integrity, and often fabricate custom hinge offsets so the gate clears the sidewalk without binding. Double swing gates for wider courtyard entries run $2,800–$4,500 in Mission District, with single swings starting around $1,800.
Double Gate Installation
Double gates solve the width problem for properties with shared courtyards or wider entries between two buildings. The challenge in Mission District is synchronizing two leaves on pitted, uneven concrete where the original threshold has settled independently on each side. We install adjustable bottom guides and heavy-duty center latches that compensate for minor misalignment. Double gate installation here typically falls between $2,800–$4,500.
Sliding Gate Installation
Sliding gates are our recommendation for Mission District’s narrow rear passages — the 24-inch side yards where a swing gate is physically impossible. Custom narrow-profile sliding hardware, sometimes with overhead track when ground track isn’t feasible, lets you secure a rear yard or garage access that would otherwise stay open. These installations start around $3,500 due to the specialized hardware and precise alignment required.
Driveway Gate Installation
Driveway gates are rare on standard Mission District lots, but they do appear on corner properties or where two adjacent lots were combined. When space allows, we install swing or sliding driveway gates with automation ready for LiftMaster or FAAC operators. These projects start at $4,500 and require careful coordination with sidewalk and curb-cut geometry.
Security Gate Installation
Security gates in Mission District often mean reinforcing existing pedestrian entries with better latches, auto-close mechanisms, or access control integration. We can retrofit electronic strikes or keypad systems onto historic ironwork without destroying the aesthetic. Security upgrades to existing gates run $800–$2,400; new security-focused installations start at $2,200.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mission District
We stock parts and install operators from FAAC, BFT, Linear, and Viking — brands that hold up in marine air and have local distribution when something specialized is needed. Our in-house inventory covers common hinge configurations, latch sets, and automation components for Mission District’s iron gate population. That means your Gate Installation project isn’t delayed waiting for a part from Los Angeles or Chicago. We fabricate what we can’t source, welding reinforcing plates and hinge brackets on-site.
Common Gate Installation Problems We See in Mission District Homes
- Original wrought iron gates have no modern hinge plates, causing sag and scraping on sloped sidewalks. The 1890–1915 gates were hung with simple pintle hinges driven into wood or masonry. A century of settling sidewalks and gate weight pulls the pin out of plumb. We see this on nearly every original gate call in 94110.
- Narrow rear passages prevent standard gate swing; retrofits require custom narrow-profile sliding hardware. The 24-inch side yards between Mission District flats were never designed for gates. When owners want to secure rear access, we install sliding systems with minimal track intrusion.
- Salt-laden fog corrodes unpainted iron hardware, leading to hinge and latch failure within 5 years even in the ‘sunny’ Mission. The fog shadow keeps the Mission warmer than the Sunset, but morning dew carries enough salt to oxidize bare metal steadily. We specify stainless or galvanized hardware for every new installation.
- DBI permit triggers under Article 10/11 catch homeowners off guard when replacing historic streetfront gates. San Francisco’s preservation rules can classify a gate replacement as a planning review item if it’s visible from the street and part of a historic-era building. We flag this early and guide you through the process.
Pricing for Gate Installation in Mission District, CA
| Gate Type | Typical Range in Mission District | Notes |
|---|---|---|
| Pedestrian swing gate (single) | $1,800 – $3,200 | Includes hardware, hinge reinforcement, basic latch |
| Double swing gate (courtyard) | $2,800 – $4,500 | Center latch, adjustable bottom guides |
| Sliding gate (narrow passage) | $3,500 – $5,500 | Custom track or overhead hardware |
| Driveway gate (where lot allows) | $4,500 – $8,000 | Automation-ready, concrete work extra |
| Security upgrade / access control | $800 – $2,400 | Electronic strike, keypad, intercom integration |
What moves the number: pilaster condition (rebuilding stucco or brick supports adds $400–$1,200), DBI permit requirements ($300–$800 in fees and drawings), automation ($900–$2,400 for operator and controls), and custom fabrication for non-standard openings. We provide itemized estimates before any work begins. Call (833) 805-4890 — estimates are free, and we’ll flag the permit question on our first visit.
We Also Serve Cities Near Mission District
Our crews work throughout San Francisco proper, including Noe Valley’s hillside lots with their own grade challenges, Visitacion Valley’s mix of residential and light industrial entries, and Chinatown’s dense pedestrian corridors with historic gate preservation needs. Each neighborhood has distinct conditions, and we adjust our approach accordingly.
Serving Mission District, CA — Our Local Coverage Area
We’re based in the Mission District area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Installation in Mission District
Yes, often you do. San Francisco’s DBI considers gate replacement on historic-era streetfronts a potential planning trigger under Article 10/11 preservation rules. We review your property’s status during our free estimate and handle the permit application if required. Call (833) 805-4890 and we’ll check it on the spot.
Most can be repaired. Many Mission District Victorian flats still have their original 1890–1915 wrought iron street gates, which often lack modern hinge reinforcements, causing chronic sagging and binding on uneven 25-foot-lot sidewalks. We typically retrofit stainless steel hinge assemblies and weld reinforcing plates to the pilaster, preserving the original ironwork while solving the geometry problem. Full replacement is only necessary when the frame itself is cracked or the iron is perforated with rust. Call for a free assessment — we’ll show you exactly what’s failing.
A sliding gate with narrow-profile hardware. Standard swing gates need 32+ inches of clear arc, which most 24-inch Mission side passages can’t provide. We install overhead-track or low-profile ground-track sliding systems that need only the width of the gate itself plus minimal clearance. These start around $3,500. Call (833) 805-4890 to measure your passage.
Faster than most owners expect. The Mission sits in a sheltered fog shadow that keeps it warmer and drier than the Outer Sunset or Richmond, but salt-laden marine air still moves through daily, and the neighborhood’s morning dew cycle is enough to steadily oxidize unpainted iron hardware. We’ve seen uncoated hinge pins seize in 3–4 years. We specify galvanized or stainless hardware and recommend a maintenance coat of paint every 5–7 years. The upfront specification matters more than the zip code’s reputation for sunshine.
Usually no, unless you have a corner lot or combined parcel. Standard 25-foot Mission District lots have sidewalk frontage of roughly 18–20 feet after accounting for pilasters and setbacks. A vehicle gate needs 10–12 feet of clear width plus swing or slide clearance, which leaves insufficient pedestrian passage per SF right-of-way rules. We can assess your specific lot geometry, but most Mission properties are better served by a secure pedestrian gate with keypad or fob access. Call (833) 805-4890 and we’ll measure your opening.
Written by David Kaplan, Owner and Field Supervisor at Ironwood Gate Repair Los Angeles, serving Mission District and San Francisco since 2011.