Fast, Reliable Gate Parts & Welding Across Burlingame
Gate parts and welding in Burlingame typically runs $180–$650 depending on whether you’re replacing a hinge on a flatland Craftsman entry or realigning posts on a hillside estate. Our Gate Parts & Welding team covers both ZIP codes, 94010 and 94011, with same-day response to most calls. David and his team have been handling Burlingame’s unique mix of 1920s wrought-iron heritage gates and modern automated hillside systems for 14 years. Call (833) 805-4890.
Why Ironwood Gate Repair Los Angeles Is Burlingame’s Preferred Gate Parts & Welding Company
We’ve earned 233 verified reviews at 4.7 stars, and a significant share come from repeat customers in Burlingame who found us after a generalist couldn’t handle their gate. David Kaplan serves as Field Supervisor, which means the person with final accountability shows up on your job — not a rotating crew you’ve never met.
Our response time to Burlingame averages under 90 minutes for urgent calls, because we keep common parts in stock rather than ordering from a warehouse across the Bay. We know the difference between a flatland gate on the original 1920s lot near Burlingame Avenue and a track-mounted slide gate on a 15% grade up in Burlingame Hills. That local knowledge saves you a diagnostic visit that goes nowhere.
We’re gate-only specialists. We don’t install garage doors, we don’t build fences, and we don’t send you to a subcontractor when welding is required. Every repair, fabrication, and alignment happens in-house.
Our Gate Parts & Welding Services in Burlingame
Hinge Replacement
Corroded hinges are the most common parts call we get in Burlingame’s flatlands. The persistent marine layer rolling off San Francisco Bay carries salt that attacks exposed hardware on older wrought-iron and steel gates. A typical hinge replacement in Burlingame runs $180–$280 for standard residential hardware, or $320–$480 when we need to fabricate a custom bracket to match period ironwork on a Spanish Colonial Revival entry. We stock corrosion-resistant stainless and galvanized options that outlast the original spec.
Post Replacement & Realignment
Tree root intrusion is a Burlingame-specific headache. The mature eucalyptus and oak canopy that makes this city beautiful also heaves gate post footings out of plumb season after season. Post realignment with custom welding to extend or reinforce anchor hardware typically costs $450–$650 in Burlingame, depending on whether we’re working around established root systems or pouring new concrete. We’ve realigned posts on Anson Lane, rebuilt footing welds near Washington Park, and handled full post replacements where root pressure made salvage impossible.
Rail Repair
Bent or separated rails on automated gates create drag that burns out operators. In Burlingame Hills, we see this where steep grades cause gates to sag against their own weight over years. Rail straightening and re-welding runs $280–$420, while rail replacement with matching profile stock runs $380–$550. We match existing rail dimensions on-site rather than ordering generic sections that won’t align with your hardware.
Custom Welding & Period Ironwork Fabrication
This is where our Burlingame work gets distinctive. Old Burlingame’s 1920s–1950s homes feature original ornate wrought-iron pedestrian gates and driveway entries with hinges, latches, and decorative elements that haven’t been manufactured in decades. Stock hardware won’t fit. We fabricate replacement components to match existing scrollwork, spear points, and bracket geometry — not approximations, but functional replicas that preserve the gate’s original character. Custom welding and fabrication for period-matching work in Burlingame starts at $350 for a single hinge or latch assembly and runs to $800+ for full gate rehabilitation with multiple fabricated elements.
Gate Rollers
Slide-gate rollers in Burlingame Hills take a beating. The distinctive local problem: eucalyptus seed pods and acorn debris accumulate in tracks year-round, jamming rollers and tripping obstruction sensors. It’s the single most common “gate won’t close” call we get each fall. Roller replacement with debris-resistant sealed bearings runs $220–$340. We also clear and realign tracks as part of the service, because new rollers in a clogged track just fail again.
Latch & Lock Repair
Salt corrosion attacks latches and locks with the same persistence it brings to hinges. We see this especially on perimeter gates within a few blocks of the Bay. Latch replacement with marine-grade hardware runs $160–$260. For automated systems, we integrate electric strike and magnetic lock replacement with your existing DoorKing or Viking access control — no need to replace a functioning system because one component failed.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burlingame
We stock parts and provide field-proven service for nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Burlingame customers, this means your existing operator is almost certainly supported — you’re not being pushed toward a full replacement because “we don’t work on that brand.” We carry common Linear and Viking control boards, DoorKing loop detectors, and Ghost Controls actuator hardware in our service vehicles. Most parts swaps happen same visit. If we need to source a specialty component, our supplier relationships typically turn it around in 24–48 hours, not the week or more you’d wait through a general contractor.
Common Gate Parts & Welding Problems We See in Burlingame Homes
- Corrosion from salt-laden bay air attacks hinges, latches, and operator housings on older iron gates in the flats near Burlingame Avenue and the Broadway corridor. The damage is often hidden until a gate sags or seizes. We catch it during inspection and replace with hardware rated for coastal exposure.
- Eucalyptus seed pods and acorns clog slide-gate rollers in Burlingame Hills, triggering obstruction sensors and preventing closure. This isn’t a motor failure — it’s a maintenance issue that mimics one. We clear tracks, replace damaged rollers, and show owners what to watch for.
- Tree root intrusion heaves gate post footings out of plumb, misaligning automated systems and stressing hinges until they crack. Burlingame’s mature canopy is the culprit. We realign posts, reinforce with custom welding, and when necessary, relocate footings to work around established root systems.
- Wood and composite gates swell in winter moisture, racking frames and jamming automated systems until dry season resets them. We see this on older properties near Washington Park and in the Craftsman-heavy blocks off Burlingame Avenue. Seasonal adjustment of limit switches and hardware clearances prevents the annual cycle of jamming.
Pricing for Gate Parts & Welding in Burlingame, CA
| Service | Typical Range in Burlingame |
|---|---|
| Hinge replacement (standard) | $180 – $280 |
| Hinge replacement (custom fabricated) | $320 – $480 |
| Post realignment with welding | $450 – $650 |
| Rail straightening/re-welding | $280 – $420 |
| Rail replacement with matching stock | $380 – $550 |
| Custom welding/period ironwork (single component) | $350 – $500 |
| Custom welding/period ironwork (full gate rehab) | $650 – $800+ |
| Gate roller replacement (sealed bearings) | $220 – $340 |
| Latch & lock replacement (marine-grade) | $160 – $260 |
These ranges reflect actual Burlingame jobs we’ve completed in the past 24 months. Final cost depends on material grade, access conditions, and whether we’re matching existing ironwork or installing standard hardware. Steep hillside sites in Burlingame Hills add 10–15% for rigging and safety setup. We provide written estimates before any work begins — call (833) 805-4890.
We Also Serve Cities Near Burlingame
Our service radius covers Hillsborough, Millbrae, San Mateo, and San Bruno. Each city presents different gate challenges — flatter terrain in Millbrae and San Bruno, different housing eras in San Mateo, larger estate properties in Hillsborough — and we adjust our approach accordingly. David and his team route daily across this corridor.
Serving Burlingame, CA — Our Local Coverage Area
We’re based in the Burlingame area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Burlingame
The salt-laden marine layer off San Francisco Bay accelerates corrosion on exposed steel and iron hardware, especially within a few blocks of the water. We replace failed hinges with galvanized or stainless-steel equivalents rated for coastal exposure, which typically last 3–4 times longer in Burlingame conditions. Call (833) 805-4890 for an inspection — estimates are free.
Yes. Eucalyptus seed pods and acorn debris accumulating in slide-gate tracks are the single most common cause of fall-season gate failures in Burlingame Hills. The debris jams rollers and trips obstruction sensors. We clear tracks, replace damaged rollers with sealed-bearing units, and realign the system. Most calls resolve same day. Call (833) 805-4890.
Yes. We fabricate custom hinges, latches, and decorative elements to match existing scrollwork and spear-point geometry on Burlingame’s period wrought-iron gates. We work from the existing gate, not catalog approximations. Custom fabrication for a single component starts at $350. Call (833) 805-4890 to schedule an on-site assessment.
We recommend annual service for Burlingame gates, with bi-annual checks for hillside installations and any gate within three blocks of the Bay. The marine layer, seasonal moisture, and debris accumulation create wear patterns faster than inland climates. A typical service call runs $140–$190 and covers hardware inspection, lubrication, limit switch verification, and debris clearing. Call (833) 805-4890 to schedule.
Not always. Many BFT, FAAC, and Linear operators can be retained with proper post realignment, sensor rewiring for grade compensation, and hardware reinforcement. We evaluate whether your existing system can be salvaged before recommending replacement. A retrofit with realignment and welding typically runs $450–$650 versus $1,200–$2,400 for a full opener replacement. Call (833) 805-4890 for an honest assessment.
Last fall, we worked on a steep driveway in Burlingame Hills where a BFT swing gate operator was tripping on safety sensors misaligned by a 15% grade. We realigned the posts, replaced a corroded hinge, and rewired the photocells to handle the slope — keeping the owner’s original wrought-iron gate intact. That’s the kind of problem-solving 14 years of gate-only work gets you.
Ready to get your gate working right? Call Ironwood Gate Repair Los Angeles at (833) 805-4890 for a free estimate anywhere in Burlingame — from the historic blocks near Burlingame Avenue to the hillside estates above.
Written by David Kaplan, Owner and Field Supervisor at Ironwood Gate Repair Los Angeles, serving Burlingame and the greater Peninsula since 2011.